ºÚÁϺ£½Ç91Èë¿Ú

For Linux systems, ºÚÁϺ£½Ç91Èë¿Ú writes to /etc/ssh/sshd_config in order to manage the sshd configuration. If exceptions are needed, it's recommended to use the . Anything within a Match block will be ignored by the ºÚÁϺ£½Ç91Èë¿Ú agent. See Using the Match Block in sshd_config below.

When a Linux device is registered, ºÚÁϺ£½Ç91Èë¿Ú will persist the original sshd_config settings via sshd extended test mode, which will detect all settings for the root user. Once ºÚÁϺ£½Ç91Èë¿Ú manages the device, the settings in the Admin Portal will be periodically enforced.

The following is a list of the possible settings, the corresponding changes made to sshd_config, and the expected behavior. 

• SSH Password Login
• Public Key Authentication
• SSH Password Login + Public Key Authentication
• SSH Password Login + MFA
• Public Key Authentication + MFA

SSH Password Login

Expected Behavior: Users will authenticate with password only.

To enable SSH Password Login:

1. Go to DEVICE MANAGEMENT > Devices.
2. Select a device. 
3. Under the device Details tab, scroll to SSH Settings.
4. Select the Allow SSH Password Login option.
5. Save Device.

/etc/ssh/sshd_config:

Public Key Authentication

Expected Behavior: Users will authenticate with public key only.

To enable Public Key authentication:

1. Go to DEVICE MANAGEMENT > Devices.
2. Select a device. 
3. Under the device Details tab, scroll to SSH Settings.
4. Select the Enable Public Key Authentication option.
5. Save Device.

/etc/ssh/sshd_config:

SSH Password Login + Public Key Authentication

Expected Behavior: When Public Key Authentication is selected in conjunction with Allow SSH Password Login, users will be able to authenticate using either of the selected options.

/etc/ssh/sshd_config:

SSH Password Login +  MFA

Expected Behavior: Users will authenticate with password and TOTP token (when the TOTP Key is activated). See Enabling TOTP MFA for Linux.

/etc/ssh/sshd_config:

Public Key Authentication + MFA

Expected Behavior:  Users will authenticate with public key and TOTP token (when the TOTP Key is activated). See Enabling TOTP MFA for Linux.

/etc/ssh/sshd_config:

Using the Match Block in sshd_config

Match is an optional, conditional block in the sshd_config, and may be used to satisfy use cases that the agent does not. The agent will not overwrite a Match block. For detailed information, see the man page for your particular distro. Append a Match block to the end of the file.

In this example, require all users to use both a password AND a public key:

Automate change distribution to many devices

In order to apply this to many devices at once, the Commands function can be leveraged in the ºÚÁϺ£½Ç91Èë¿Ú Admin Portal.

Considerations:

• Before running this across many systems, test the process on a small number of systems to manually verify desired behavior has been achieved.
• This will not work with very old versions of sshd. In testing, we found the parameters needed for the exception were not honored with OpenSSH 5.x.
• The script expects your sshd service to be called sshd. If it is not, modify lines 27 and 29 with the appropriate name of the service.
• Appending the Match block to the end of the config is one way, and does not check to see if there are conflicting Match blocks. This method should work for most implementations, but testing before mass deployment is recommended.
• The Match block in this script contains the above conditions. If there are other conditions required for your environment, change them as needed.

To apply to multiple devices in Commands:

1. Copy the contents of the to a local file.
2. In the ºÚÁϺ£½Ç91Èë¿Ú Admin Portal, create a new command. See Get Started: Commands.
3. Upload the file created in step 1.
4. Enter the path to the file in the command for execution. This is /tmp/FILENAME by default
5. Select the desired device or device groups to apply the command to and save.
6. When ready, select the new command and select run now.
7. This command should return exit 0. Depending on the Linux flavor, there may also be some stdout in the logs section.

Configuring SSH Settings at Scale

In order to make changes to existing systems' ssh settings at scale, below are examples of two tools that allow for finding any system based on filter parameters, and then setting the desired parameters. In both examples, we're filtering on the following settings:

• allowSshPasswordAuthentication
• allowPublicKeyAuthentication
• allowMultiFactorAuthentication

Depending on the current settings of the system, one or more parameters may need to be set to false. In both examples, any system found will be set to only require public key authentication unless the parameter values are changed. 

Using the PowerShell Module

See the for PowerShell Module basics.

To change the filter parameters, set one or more boolean values to false on the Get-JCSystem side of the operation. To change the settings being applied, set one or more of the boolean values on the Set-JCSystem side of the operation. Results are printed to screen.

Using Bash

To change the filter parameters, set one or more boolean values to false within the getSystems function. To change the settings being applied, set one or more of the boolean values in the putSystemParams function. When the script runs, a file called results will be generated in the current working directory containing the output of the API call in putSystemParams. This will allow for checking that changes were made as expected.